Applications
(1) Bonding and waterproof sealing in electronic components,semi-conductors,electronic appliance,motors,LED light.
(2) Bonding and sealing engineering-plastics, metal , glass, ceramics.
(3) Positioning, reinforcing, and moisture proof sealing electronic components in circuit board.
(4) Also, can bond in bumpers, hangers, and mirrors, seal in car lights, rear-view mirrors, and shower heads.
Usage method
1. Must be glued or coated with the surface clean, remove rust, dust and oil etc.
2. The first set on the mouth, and then cut into the size of the rubber mouth. Then glue onto the surface has been cleaned, the uniform distribution will be the sticky surface can be folded and fixed.
3. The bonded parts are placed open and room temperature curing can be put into use after 24 hours.
ATTENTION
1. It can be cured with moist air, and in a large area of the occasion may take a long time.
2. After the operation of the bonding process is completed, the rubber should be tightened immediately after the operation is finished. If the seal has a little crust, remove it.
3. Avoid contact with eyes, skin and clothing. Wash immediately with soap and water after contact with skin. If you accidentally splashed into the eyes, rinse immediately with plenty of water, and medical treatment.
4. The use of glue dispensing machine. The end of the job should be immersed in the container dispensing needle containing silicone oil to prevent clogging of curing head.
STORAGE
Product shall be ideally stored in a cool and dry place.
